View ES2G-13-F_730456.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SPICE MODELS: ES2A ES2B ES2C ES2D ES2AA ES2BA ES2CA ES2DA
ES2A/A - ES2D/A
2.0A SURFACE MOUNT SUPER-FAST RECTIFIER Features
* * * * *
Glass Passivated Die Construction Super-Fast Recovery Time For High Efficiency Surge Overload Rating to 50A Peak Ideally Suited for Automated Assembly Lead Free Finish/RoHS Complaint (Note 4)
B
Dim A
SMA Min 2.29 4.00 1.27 0.15 4.80 0.10 0.76 2.01 Max 2.92 4.60 1.63 0.31 5.59 0.20 1.52 2.30
SMB Min 3.30 4.06 1.96 0.15 5.00 0.10 0.76 2.00 Max 3.94 4.57 2.21 0.31 5.59 0.20 1.52 2.40
Mechanical Data
* * * * * * * * *
Case: SMA/SMB Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band or Cathode Notch Marking Information: See Page 3 Ordering Information: See Page 3 SMA Weight: 0.064 grams (approximate) SMB Weight: 0.093 grams (approximate)
A
C
B C D E G H
D
J
e3
H
G E
J
All Dimensions in mm
AA, BA, CA, DA Suffix Designates SMA Package A, B, C, D, Suffix Designates SMB Package
Maximum Ratings and Electrical Characteristics
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 5) RMS Reverse Voltage Average Rectified Output Current @ TT = 110C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage (Note 5) Reverse Recovery Time (Note 3) Typical Total Capacitance (Note 2) Typical Thermal Resistance, Junction to Terminal (Note 1) Operating and Storage Temperature Range @ IF = 2.0A @ TA = 25C @ TA = 125C Symbol VRRM VRWM VR VR(RMS) IO IFSM VFM IRM trr CT RqJT Tj, TSTG
@ TA = 25C unless otherwise specified
ES2A/A 50 35
ES2B/A 100 70 2.0 50 0.92 5.0 350 25 25 20
ES2C/A 150 105
ES2D/A 200 140
Unit V V A A V mA ns pF C/W C
-55 to +150
Notes:
1. 2. 3. 4. 5.
Unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pads as heat sink. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See Figure 5. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7. Short duration pulse test used to minimize self-heating effect.
DS14002 Rev. 10 - 2
1 of 3 www.diodes.com
ES2A/A - ES2D/A
a Diodes Incorporated
IF, INSTANTANEOUS FORWARD CURRENT (A)
2.4 IO, AVERAGE FORWARD CURRENT (A) 2.0 1.6
10
Tj = 25oC
1.0
1.2 0.8 0.4
0.1
0 25 50 75 100 125 150 175
0.01 0 0.4 0.8 1.2 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics
TT, TERMINAL TEMPERATURE (C) Fig. 1 Forward Current Derating Curve
IFSM, PEAK FORWARD SURGE CURRENT (A)
60
Single Half-Sine-Wave
1000
50
100
Tj = 125C
40 30 20
1.0 10
Tj = 25C
10 0 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Surge Current Derating Curve 100
0.1 0 40 80 120
PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics
trr +0.5A
Device Under Test
(-)
Pulse Generator (Note 2)
0A
(+)
50V DC Approx
-0.25A
(-)
Oscilloscope (Note 1)
(+)
-1.0A Set time base for 50/100 ns/cm
Fig. 5 Reverse Recovery Time Characteristic and Test Circuit
DS14002 Rev. 10 - 2
2 of 3 www.diodes.com
ES2A/A - ES2D/A
Ordering Information
Device ES2xA-13-F ES2x-13-F
(Note 6) Packaging SMA SMB Shipping 5000/Tape & Reel 3000/Tape & Reel
* x = Device type, e.g. ES2BA-13-F (SMA package); ES2A-13-F (SMB package). Notes: 6. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Marking Information
ES2XA = Product type marking code, ex: ES2BA (SMA package) ES2X = Product type marking code, ex: ES2A (SMB package) = Manufacturers' code marking YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52
YWW ES2X(A)
IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated.
DS14002 Rev. 10 - 2
3 of 3 www.diodes.com
ES2A/A - ES2D/A

▲Up To Search▲

Price & Availability of ES2G-13-F

	To Download ES2G-13-F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .